1.1 To lay down the general safety procedure in microbiology laboratory.
2.0 SCOPE
2.1 This procedure applies to the Pharmaceutical Manufacturing Facility of ___________________________________________________________________
3.0 RESPONSIBILITY
3.1 Officer-Quality Control
3.2 Head –Respective Department.
4.0 ACCOUNTABILITY
4.1 Head – Quality Control
5.0 PROCEDURE
5.1 General safety procedures
5.2 Everyone must wear a lab garments or lab apron while in the laboratory.
5.3 Everyone must wear goggles while handling chemicals / microbial cultures.
5.4 Upon entering the lab, and after finishing, clean your LAF bench space with the disinfectant.
5.5 Keep all sources of possible contamination out of your mouth--hands, pencils, and laboratory ware, other items.
5.6 Do not drink or eat in the laboratory.
5.7 Decontaminate and clean all contaminated equipment such as pipettes.
5.8 Report accidents, such as a spilled culture or a cut, to the laboratory supervisor.
5.9 If you do not understand something, ASK!!! Supervisor and get retrained.
5.10 Handling of Microbiological spillage.
5.10.1 Spillage of bacterial / fungal suspensions and contaminated media shall be immediately poured with disinfectant solution and allowed to be in contact for at least for 10 minutes.
5.10.2 Wear hand gloves and mask and clean up the spills with paper towels. Discard the towels and media materials in to a SS bin.
5.10.3 Decontaminate As per decontamination and disposal of used media the spills by placing the SS vessel in autoclave.
5.10.4 Disinfect the hands after cleaning of spillage.
5.11. Handling of chemical spillage.
5.11.1 Immediately after Spillage all the persons to be informed in the laboratory, ensure that they do not walk on the spillage.
5.11.2 Person involves in cleaning must to wear goggles, hand gloves and nose mask while cleaning.
5.11.3 Incase of corrosive liquids, put sand on spillage area remove sand and discard clean with wet cloth.
5.11.4 Incase of powder or solid spillage they are to be discarded after dissolving in water.
5.11.5 In case of organic solvents dry cloth mopping is to be done , solvent to be wiped collect in a container to discard.
5.11.6 For water spillage mop with dry cloth.
5.12 Sample destruction.
5.12.1 Do not discard any sample in powder form, all analytical left over samples to be dissolved in water and drained in sink.
5.12.2 Samples which are not dissolved in water, dissolve to neutralize in 10% NaOH solution.
5.13 Incase of any abnormal smell is detected vacate the lab and in form to Supervisor or Department Head.
6.0 ABBREVIATIONS
6.1 SS - Stainless Steel.
6.2 SOP - Standard Operating Procedure.
6.3 QC - Quality Control.
7.0 REFERENCES
7.1 Nil
8.0 ANNEXURES
8.1 Nil.
END OF THE DOCUMENT
END OF THE DOCUMENT
Hi. I’m Writer of Researchsop.com. ’ ’ Please share these SOPs to all concern pharma people for their development. I like to fullfill the need of curious people. These things inspire me to make things looks better.
You select the best topic fop writing. You discuss related to general safety in microbiology laboratory in detail. Further, private investigators in Irvine CA are often employed by law firms, insurance companies, bankruptcy courts and occasionally by individuals.
ReplyDelete