STP FOR THE DETERMINATION OF SOLVENT-SOLUBLE EXTRACTIVE VALUE


1.0 PURPOSE

The purpose of the document is to establish a general and uniform method for solvent-soluble extractive value.

2.0 SCOPE

This standard testing procedure is suitable for the determination of solvent-soluble extractive value.

3.0 RESPONSIBILITY

The expert and trained chemist are responsible for following this procedure. The technical manager is responsible for implementing this procedure.

4.0 REQUIREMENTS

4.1 Apparatus

4.1.1 Analytical balance

4.1.2 Shaker

4.1.3 Water bath

4.1.4 Hot Air Oven

4.2 Glassware

4.2.1 Volumetric Flask

4.2.2 Petri-dish

4.2.3 Funnel

4.2.4 Measuring cylinder

4.3 Reagent

4.3.1 Water, ethyl alcohol & other solvent as applicable

5.0 PROCEDURE

5.1 Weigh 2.0g to 5.0 g of sample in a stoppered volumetric flask.

5.2 Add 100 ml of solvent to it.

5.3 Shake it for 8 hours continuously on a shaker.

5.4 Keep it still for 16 hours.

5.5 Filter it with Whatman filter paper (No.-1) in a previously dried dish.

5.6 Take 25 ml of solvent into a previously dried and weighed petri dish at 105°C for 30 min.

5.7 Now evaporate the solvent by keeping the Petri dish in the water bath.

5.8 Keep the petri-dish in the oven for drying at 105°C for 1 hr.

5.9 Remove the dish from the oven and place it in the desiccator for cooling.

5.10 Note down the dry weight of the petri-dish.

Note: For water-soluble extractives, use water instead of solvent.

  

6.0      CALCULATION

                                     (W2-W1/W) X100 X 100/25                                                                

                Where,

W2=Weight of dish+ sample weight (after drying), in g

W1=Weight of the empty dish, in g

W =Weight of air-dried sample in g


7.0 REVISION/CHANGE HISTORY: NA

8.0 ATTACHMENTS

· Appendix-1: FLOW CHART FOR SOLVENT SOLUBLE EXTRACTIVE

9.0 REFERENCES

· Appendix 2.2.7 of A.P.I. Part II, Vol-1,2007


SHARE

Owner

Hi. I’m Writer of Researchsop.com. ’ ’ Please share these SOPs to all concern pharma people for their development. I like to fullfill the need of curious people. These things inspire me to make things looks better.

  • Image
  • Image
  • Image
  • Image
  • Image
    Blogger Comment
    Facebook Comment

0 comments:

Post a Comment