STP FOR DETERMINATION OF IODINE VALUE IN OIL AND FAT

1.0 PURPOSE

The purpose of the document is to establish a general and uniform method for iodine value in oil and fat.

2.0 SCOPE

This standard testing procedure is suitable for the determination of iodine value in oil and fat.

3.0 RESPONSIBILITY 


The expert and trained chemist are responsible for following this procedure. The technical manager is responsible for implementing this procedure.

4.0 REQUIREMENTS

4.1 Apparatus: NA

4.2 Glassware

4.2.1 Glass-stopped Iodine Flask (250 ml)

4.2.2 Burette-50 ml

4.2.3 Pipette-10 ml,25 ml

4.2.4 Measuring cylinder-100 ml

4.3 Reagent

4.3.1 Potassium iodide (10%)

4.3.2 Standard sodium thiosulphate solution (0.1N)

4.3.3 Starch solution

4.3.4 Wijs Iodine monochloride solution

4.3.5 Carbon tetra chloride or Chloroform

5.0 PROCEDURE

5.1 Melt the sample if not already completely liquid.

5.2 The sample should remove impurities.

5.3Weigh accurately according to list or table no-3 which is given in IS 548.

5.4 Add 25 ml carbon tetra chloride or chloroform to dissolve the content.

5.5 Add 25 ml WIJS solution to place the glass stopper.

5.6 In some processes makes blank.

5.7 Allow to stand in dark for 30 min. also at the walls above the stopper add some water to prevent the liberation of iodine.

5.8After standing in dark add 15 ml of Potassium iodide solution and 100 ml water.



5.9 Rinsing the stopper.

5.10 Titrate the liberated iodine with standard (0.1N)sodium thiosulphate solution,

5.11 Swirling the contents of the bottle continuously to avoid any local excess until the color of the solution is straw yellow.

5.12 Add 1 ml of starch solution and continue the titration

5.13 Blue colors appear which turns to colorless.

5.14 Note down the titration value.

6.0       CALCULATION


                                   

 

7.0      REVISION/CHANGE HISTORY: NA

8.0      ATTACHMENTS

·            Appendix 1: FLOW CHART FOR IODINE VALUE

 

9.0      REFERENCES

·                                       Clause no. 14 of IS 548 Part I:1964; (RA 2015), Amd.-5,1996





                                                                      END OF THE DOCUMENT


1. List of All SOPs and Documents for the Microbiology Laboratory

2. List of All SOPs and Documents for In-vitro Laboratory

3. List of All SOPs and Documents for the In-vivo Laboratory.

4. List of All SOPs and Documents for Clinical Research

5. List of Instruments and Equipment Used In Laboratory Animal Facility

6. List of All SOPs and Documents for the Animal House Facility


 

SHARE

Owner

Hi. I’m Writer of Researchsop.com. ’ ’ Please share these SOPs to all concern pharma people for their development. I like to fullfill the need of curious people. These things inspire me to make things looks better.

  • Image
  • Image
  • Image
  • Image
  • Image
    Blogger Comment
    Facebook Comment

0 comments:

Post a Comment