STANDARD OPERATING PROCEDURE FOR OPERATION OF COMPOUND MICROSCOPE
1.0
OBJECTIVE
To lay
down the procedure for the operation of a compound microscope.
2.0
SCOPE
This
SOP shall be applicable for the operation of the compound microscope
in the Microbiology Lab.
3.0
RESPONSIBILITY
3.1
Microbiologists and above shall be responsible for
the preparation and execution of this SOP
3.2
QC & QA Head shall be responsible for the checking and approval of this
SOP.
4.0
ACCOUNTABILITY
Head QC
5.0
PROCEDURE
5.1
Observation and viewing of objects
5.1.1
Microscope
shall be kept on a vibration-free platform.
5.1.2
Surface
of microscope shall be clean with a clean cotton cloth to remove the dust.
5.1.3
Eyepiece,
magnifying lenses and condenser shall be clean with cotton soaked in xylene.
5.1.4
Frequency: Before and after use.
5.1.5
Ensure that the power supply to the microscope is switched
ON so that the bulb will glow.
5.1.6
Low
power (10x) objective shall be adjusted by rotating the revolving nose piece in position.
5.1.7 The focus of light shall be adjusting with the help of a mirror and condenser.
5.1.8 When
the image comes into focus with the low power (10x) objective, the nose piece
is rotated to the next lens (i.e, 40x
or 100x) by simply swinging the objective desire into place, without raising
the body tube.
5.1.9 When
using the oil immersion objective, the high power objective shall be swing partially
out of way and place a drop of immersion oil on the area of the slide where
observing and bring the oil- immersion objective into position.
5.1.10
Now look
through the eyepiece and focus the object with a fine-adjustment knob.
5.1.11
A slide can be moved in left, right, upper and
lower direction to observe the complete smear area with the help of the slide stage
screw and coarse adjustment.
5.1.12
After
completion of observation slides shall be removed, objective lens shall be clean
and condenser with cotton soaked in xylene. Lower down the condenser and place
low power objective in position.
5.2 Precautions
5.2.1
Slide shall
be observing with both eyes open to have less strain on your eyes.
5.2.2
Always
focus your slide slowly and carefully and with low- power objective first
5.2.3
Ensure
for keeping the microscope and its parts (e.g stage, lenses, mirror) clean
and handle all the parts with care.
5.2.4
Microscope
shall be covered always when not in use to keep out dust.
5.2.5
On the
completion of the exercise, the microscope shall be cleaned thoroughly.
6.0
REFERENCES
NA
7.0
ANNEXURE
NA
8.0 ABBREVIATIONS:
SOP : Standard Operating
Procedure
QCD : Quality Control Department
EQP : Equipment
Dept. : Department
QC : Quality Control
QA : Quality Assurance
QCD : Quality Control Department
No. : Number
NA : Not Applicable
I.P.A : Iso Propyl Alcohol
Lab. : Laboratory
0 comments:
Post a Comment