SOP STERILIZATION OF EXPERIMENTAL TOOLS | FOR STANDARD OPERATING PROCEDURE FOR STERILIZATION OF EXPERIMENTAL TOOLS

                   1.0                            OBJECTIVE

1.1                            To lay down a procedure to be followed for sterilization of experimental tools.

2.0                            SCOPE

2.1                            This Standard Operating Procedure (SOP) shall be applicable for sterilization                        of experimental tools in Animal House Facility.

3.0                            RESPONSIBILITY

3.1                            Head- Animal House Facility

3.2                            Attendant- Animal House Facility

4.0                            DEFINITIONS

4.1                            Nil

                   5.0                            PROCEDURE

5.1                            Equipment for animals in the experiment should be free from microbial                                 contamination. Before the use of any equipment for the animal experiment                             it should be properly sterilized in autoclave.

5.2                            Material Preparation

5.2.1                      Ensure that the material is safe for autoclaving.

5.2.2                      Samples containing solvents or substances that may emit toxic fumes shall not                       be autoclaved.

5.2.3                      Glassware shall be inspected for cracks prior to autoclaving.

5.2.4                      Material shall be prepared and packaged suitably:

5.2.5                      Loose dry materials shall be wrapped or bagged in steam-penetrating paper or                       loosely covered with aluminum foil. Wrapping too tightly may impede steam                         penetration, decreasing the effectiveness of the process.

5.2.6                      All lids shall be loosened to prevent pressure buildup. All containers shall be                         covered by a loosened lid or steam-penetrating bung.

5.2.7                      Heat-resistant borosilicate glassware/s shall be used.                

5.2.8                      Plastics must be heat-resistant, i.e., polycarbonate (PC), PTFE (“Teflon”) and                         most polypropylene (PP) items.

5.2.9                      All items shall be tagged with autoclave tape.

5.2.10                  Items shall be placed in a stainless steel pan or other autoclavable container                           for their stability and ease of handling.

5.2.11                  Bags must not be tightly sealed as steam cannot penetrate.

5.3                            Autoclave loading and operation

5.3.1                      Autoclave loading and use shall be done as per respective microbiology                                 laboratory SOP.

5.3.2                      Note: Do not mix incompatible materials.

                     Don’t overload and leave sufficient room for steam circulation. If necessary,                         keep the container on its side to maximize steam penetration and avoid                                   entrapment of air.

5.4                            After completion of the sterilization cycle keeps the equipment at a clean dry                         and preferably sterile place with intact wrapping.

5.5                            Remove the wrapping immediately before use.

6.0                            ENCLOSURES

6.1                            Nil

7.0                            ABBREVIATIONS

7.1                            SOP- Standard Operating Procedure

7.2                            AHF- Animal House Facility

8.0                            REFERENCES

8.1                            Nil

9.0                            REVISION HISTORY

Sr. No.

Change Control No.

Reason for change

1.

 

 

                                                                                                                 

END OF DOCUMENT

SHARE

Owner

Hi. I’m Writer of Researchsop.com. ’ ’ Please share these SOPs to all concern pharma people for their development. I like to fullfill the need of curious people. These things inspire me to make things looks better.

  • Image
  • Image
  • Image
  • Image
  • Image
    Blogger Comment
    Facebook Comment

0 comments:

Post a Comment