SOP FOR PROCEDURE FOR STOP WATCH | STANDARD OPERATING PROCEDURE FOR STOP WATCH

 1.0                            OBJECTIVE

1.1                            To lay down a standard procedure to be followed for Operation and Calibration of StopWatch.

2.0                            SCOPE

2.1                            This Standard Operating Procedure (SOP) shall be applicable for Operation and Calibration of StopWatch in Animal House Facility.

3.0                            RESPONSIBILITY

3.1                            All Personnel operating Stop Watch.

4.0                            DEFINITIONS

4.1                            Nil

5.0                            PROCEDURE



5.1                            Operation

5.1.1                       Functions reading

5.1.1.1                 Normal the display shows hour, minutes seconds, and day of the week.

5.1.1.2                 Push A for the alarm time.

5.1.1.3                 Push B for mode.

5.1.1.4                 Push C for month date, day of the week.

5.1.2                       Stop functions

5.1.2.1                 Push B for stop function.

5.1.2.2                 Push C for count and stop.

5.1.2.3                 Push A for the lap and reset.

5.1.3                       Alarm and chime ON/OFF

5.1.3.1                 Chime (%/……..) on and off.

5.1.3.2                 In normal time hold A then push C or hold A then push B.

5.1.3.3                 Chime flag appears. Chime on chime flag disappears. Chime off.

5.1.3.4                 Alarm ( /  ) on and off.

5.1.3.5                 Alarm flag appear farm on alarm flag disappear alarm off.

5.1.4                      Alarm time setting

5.1.4.1                 Hold B about 3 seconds or push B once by once.

5.1.4.2                 (Day of week flag above Monday flashing)

5.1.4.3                 Push C or A to change hour/ minute function then advance figure by pushing A or C

5.1.4.4                 Push B to normal time

5.1.5                      Normal time setting

5.1.5.1                 Hold B for about 3 seconds then push B once or push b once by once.

5.1.5.2                 (Day of week flag above Tuesday flashing).

5.1.5.3                 Advance figure by pushing A or C.

5.1.5.4                 Select 12/24 hour cycle option in normal time.

5.1.5.5                 Hold A then push B or when time (hour) setting 12/24 hour cycle option will appear alternatively on every 24-hour cycle during hour advance month and date interchange by holding C then push A or cannot be changed. 

5.2                          Calibration

5.2.1                    Calibration of the StopWatch shall be carried out by the outside agency.

5.2.2                    Calibration shall be done once a year or as per requirement and calibration label shall be updated subsequently.

6.0                         ENCLOSURES

6.1                            Nil

7.0                            ABBREVIATIONS

7.1                            SOP                     : Standard Operating Procedure

7.2                            QAD                    : Quality Assurance Department

7.3                            AFH                     : Animal House Facility

8.0                            REFERENCES

8.1                            In-house

8.2                            User Manual

9.0                           REVISION HISTORY

END OF DOCUMENT

SHARE

Owner

Hi. I’m Writer of Researchsop.com. ’ ’ Please share these SOPs to all concern pharma people for their development. I like to fullfill the need of curious people. These things inspire me to make things looks better.

  • Image
  • Image
  • Image
  • Image
  • Image
    Blogger Comment
    Facebook Comment

0 comments:

Post a Comment