1.0 OBJECTIVE
To lay down the standard operating procedure for disposal of chemical waste.2.0 SCOPE
This SOP shall be applicable for disposal of chemical waste in Chemical Laboratory.
3.0 RESPONSIBILITY
3.1 Chemist and above shall be responsible for the preparation and execution of this SOP
3.2 QC & QA Head shall be responsible for the checking and approval of this SOP.
3.3 Company General Manager shall be responsible for the authorization of this SOP.
4.0 ACCOUNTABILITY
Head QC
5.0 PROCEDURE
5.1 Solid waste the left over sample or waste after the analysis shall be collect or deposit into the ‘Solid waste bin’ container.
5.2 Liquid waste shall be collect or deposit into the ‘Liquid waste bin’ container.
5.3 The expired / invalid chemicals and reagents shall be discard or pour into the respective waste bin.
5.4 The liquid waste shall be pour slowly into the waste bin to avoid spillage or fumes evaporation.
5.5 An empty bin shall be keep to replace the filled one at any time to collect the waste.
5.6 The spillage shall be clean on the surface of container immediately during usage.
5.7 The filled waste bin shall be store in the designated location and send it to outside party for disposal.
5.8 Precautions
5.8.1 Ensure that proper personal protective equipment like hand gloves and nose mask shall be use during handling.
5.8.2 Trained Laboratory personnel shall be handle the chemicals waste.
5.8.3 The waste bin shall not be filled above the mark provided.
5.8.4 The spillage shall be remove immediately, if any.
5.8.5 The container shall not be close tightly.
5.8.6 The waste shall not be drain into sink.
6.0 REFERENCES
Not Applicable
7.0 ANNEXURE
Not Applicable
8.0 ABBREVIATIONS :
SOP : Standards Operating Procedure
QC : Quality Control
CGM : Company General Manager
HOD : Head of the Department
QA : Quality Assurance
QCD : Quality Control Department
QAD : Quality Assurance Department
EQP : Equipment
END OF THE DOCUMENTS
You may like to see following links:
0 comments:
Post a Comment