Standard Operating Procedure (SOP) for Urine Analyzer Erba Mannheim LAURA Version 2
1.0 Objective:
The purpose of this SOP is to provide guidelines for the proper operation and maintenance of the Urine Analyzer Erba Mannheim LAURA Version 2 to ensure accurate and reliable urine sample analysis.
2.0 Scope:
This SOP applies to all laboratory personnel responsible for operating the Urine Analyzer Erba Mannheim LAURA Version 2.
3.0 Principle of Working:
The Urine Analyzer Erba Mannheim LAURA Version 2 is a semi-automated system designed to analyze urine samples for various parameters such as pH, specific gravity, protein, glucose, ketones, bilirubin, urobilinogen, nitrites, leukocytes, and blood.
4.0 Preparation of Instrument:
a. Ensure that the Urine Analyzer is placed on a clean, stable, and level surface.
b. Power on the analyzer and allow it to warm up as per the manufacturer's instructions.
5.0 Calibration:
a. Perform daily calibration using the provided calibrators and controls, as per the manufacturer's instructions.
b. Record the calibration results and adjust the analyzer if necessary.
6.0 Sample Collection and Preparation:
a. Collect urine samples in clean, sterile containers following standard protocols.
b. Mix the urine sample gently to ensure homogeneity.
c. If required, centrifuge the sample to remove any particulate matter before analysis.
7.0 Sample Analysis:
a. Take the required amount of urine sample as specified by the manufacturer and load it onto the sample tray of the analyzer.
b. Enter sample information such as patient ID, sample ID, and other relevant details into the system.
c. Start the analysis using the appropriate test parameters and reagents.
8.0 Data Interpretation:
a. Allow the Urine Analyzer to complete the analysis process.
b. Record the results displayed on the analyzer's screen or print them as required.
9.0 Quality Control:
a. Run quality control samples regularly as per the laboratory's quality control plan.
b. Verify that the results fall within the acceptable range specified by the manufacturer.
10.0 Maintenance:
a. Follow the manufacturer's guidelines for routine maintenance of the Urine Analyzer.
b. Keep the instrument clean and free from any spills or debris.
c. Regularly check and replace reagents and consumables when required.
11.0 Troubleshooting:
a. In case of any error messages or unusual results, consult the instrument manual for troubleshooting guidelines.
b. If the issue persists, inform the laboratory supervisor or maintenance personnel.
12.0 Safety Precautions:
a. Wear appropriate personal protective equipment (PPE) while handling samples and reagents.
b. Dispose of waste materials according to the laboratory's waste management procedures.
13.0 Record Keeping:
a. Maintain a record of all urine sample analyses, calibrations, and quality control results.
b. Keep track of any maintenance and troubleshooting activities performed on the analyzer.
Note: This SOP should be reviewed and updated regularly to reflect any changes in instrument operation, manufacturer's recommendations, or laboratory procedures. Always follow the manufacturer's instructions provided in the instrument manual for accurate and safe operation.
END OF THE DOCUMENT
You may like to read these links:
2. List of All SOPs and Documents for In-vitro Laboratory
3. List of All SOPs and Documents for the Animal House Facility
4. List of All SOPs and Documents for Clinical Research
Hi. I’m Writer of Researchsop.com. ’ ’ Please share these SOPs to all concern pharma people for their development. I like to fullfill the need of curious people. These things inspire me to make things looks better.
0 comments:
Post a Comment