STANDARD OPERATING PROCEDURE FOR GYRATORY SIEVE SHAKER

 1.0    PURPOSE

The purpose of this document is to carry out the operation of the Gyratory Sieve Shaker.


2.0 SCOPE

This procedure is applicable to the Gyratory Sieve Shaker used in the Laboratory.

3.0 RESPONSIBILITY

Chemists/analysts are responsible for following this procedure. The section In-charge/QC/Quality Manager is responsible for implementing this procedure.

4.0 INSTRUMENTS DETAILS

Name of Instrument : Gyratory Sieve Shaker

Make : Fabricated

Instrument Identification No. :

5.0 PROCEDURE

5.1 Operation.

5.1.1 Place on a level surface and plug the cord into the main supply.

5.1.2 Switch on the Instrument.

5.1.3 Unscrew the upper lid of the sieve holder and remove it by lifting it in an upward direction.

5.1.4 Place the sieves of appropriate mesh size as per the procedure on the platform and replace & tight the screw of the upper lid of the sieve holder.

5.1.5 Adjust the speed of shaking with the help of the knob.

5.1.6 Stop when the operation is finished and remove the sieves.

5.1.7 Return the switch to the ‘OFF’ position once finished.

5.2 Maintenance

5.2.1 Unplug the sieve shaker from its power supply before attempting any cleaning measures.

5.2.2 Use a dry cloth or sponge to clean the outside surface.

5.2.3 Ensure that the working bench is clean.

5.2.4 Ensure that the electrical connections are properly connected.

6.0 REVISION/CHANGE HISTORY: NA

7.0 ATTACHMENTS

· Appendix-1 : FLOW DIAGRAM FOR THE OPERATING PROCEDURE OF GYRATORY SIEVE SHAKER

8.0 REFERENCES

· Operational Manual

 

                                                                 END OF DOCUMENT

You may like to read these links:   

1. List of All SOPs and Documents for In-vivo Laboratory

2. List of All SOPs and Documents for Study Protocol

3. List of Pharmacological Study Models with details about disease Inducing agents, Standard or Reference drugs, and related parameters.

4. List of OECD Guidelines or Toxicological Studies

5. List of Pharmacopeia Test or Quality Control Test or Batch Testing Parameters (In-vivo)

6. List of All SOPs and Documents for the Chemistry Laboratory

7. List of All SOPs and Documents for Calibration of the Instruments and Equipment

8. List of All SOPs and Documents for Laboratory Instruments and Equipment

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SHARE

Owner

Hi. I’m Writer of Researchsop.com. ’ ’ Please share these SOPs to all concern pharma people for their development. I like to fullfill the need of curious people. These things inspire me to make things looks better.

• 
• 
• 
• 
•