Quality System Procedure: (PTL/QSP/18) Procedure for Handling of Test Items in Testing Laboratories

1. Purpose: To define a system in the organization to handle the items under testing.

2. Scope: This procedure is applicable to all test items being tested in the laboratory.

3. Responsibility: Technical Manager is responsible to implement this procedure.

4. Procedure:

 

4.1 Our laboratory is conducting tests for the samples provided by our customer.

4.2 The products of test samples are Pesticides and their formulations. The test samples are properly handled, protected, and stored properly including all provisions necessary to protect the integrity of the test item.

4.3 PTL is identified all samples by unique identification no. or by providing the stickers.

4.4 All Samples are kept in proper environmental conditions and stored properly.

4.5 Enter the samples in sample Performa along with data of receiving samples according to the requirement and mark them by identification no.

4.6 Hand over the samples of the desired tests to the relevant Laboratory personnel.

5. References: Nil

CHANGE HISTORY

 

Sr.No.	Date of change	Revision no. of old document	Date of old document	Revision no. of Revised document	Date of Revised document	Nature of change (addition/deletion)

 

                                                      END OF THE DOCUMENT

***********************************************************************************

You Also Like to See This:

1. PTL/QSP/01 Procedure for Customer Confidential Information and Proprietary Rights

2. PTL /QSP/02 Procedure for Document & Data Control

3. PTL /QSP/03 Procedure for Purchasing, Services, and Supplies

4. PTL /QSP/04 Procedure for Service to the Customer

5. PTL /QSP/05 Procedure for Customer Complaints

6. PTL QSP/06 Procedure for Control of Non-Conforming Testing.

7. PTL /QSP/07 Procedure for Improvement

8. PTL /QSP/08 Procedure for Corrective Action

9. PTL /QSP/09 Procedure for Preventive Action

10. PTL /QSP/10 Procedure for Control of Records

11. PTL /QSP/11 Procedure for Internal Audit

12. PTL /QSP/12 Procedure for Management Review

13. PTL /QSP/13 Procedure for Training

14. PTL /QSP/14 Procedure for Housekeeping

15. PTL /QSP/15 Procedure for Estimation of Uncertainty of measurement

16. PTL /QSP/16 Procedure for Equipment

17. PTL /QSP/17 Procedure for Measurement Traceability and Calibration

18. PTL /QSP/18 Procedure for Sampling

19. PTL /QSP/19 Procedure for Handling of Test and Calibration Items

20. PTL /QSP/20 Procedure for Assuring the Quality of Test

21. PTL /QSP/21 Procedure for Reporting of Results

22. PTL/QSP/22 Procedure for use of NABL Symbol

-----------------------------------------------------------------------------------------------------------

23. List of All SOPs and Documents for the Chemistry Laboratory

24. List of All SOPs and Documents for Quality Control

25. List of All SOPs and Documents For Quality Assurance Dept.

26. List of SOPs and Documents Required to Achieve NABL Accreditation 

27. List of All SOPs and Documents for Laboratory Instruments and Equipment  

28. List of SOPs and Documents for Laboratory Administration

29. STANDARD OPERATING PROCEDURE FOR ARCHIVING THE DOCUMENTS AND SUBSTANCES

30. List of SOPs for Safety In Laboratory

31. List of Items or Substances that can be Archived in the Laboratory

32. STANDARD OPERATING PROCEDURE FOR DISPOSAL OF ARCHIVED MATERIAL

Note: Replace DTL with PTL for Drug Testing Laboratory.