Quality System Procedure: (PTL/QSP/14) Procedure for Accommodation, Housekeeping & Environmental Condition in Testing Laboratories

1. Purpose: To define a system in the organization to maintain good housekeeping, accommodation, and environmental condition.

2. Scope: This procedure is applicable to all activities affecting the laboratory management system.

3. Responsibility: Technical Manager is responsible to implement this procedure.

4. Procedure:



 

4.1 Laboratory is cleaned daily basis.

4.2 All records, samples, and reagents are stored in almirahs/racks so as to ensure their integrity. Almirahs/racks are cleaned daily.

4.3 The laboratory equipment is cleaned with a dry cloth on regular basis.

4.4 Samples, reagents, and standards are stored so as to ensure their integrity. The laboratory guards them against deterioration, contamination, and loss of identity.

4.5 The laboratory is maintained the environmental conditions i.e. Temperature & Humidity required for particular tests. Temperature and Humidity are measured on daily basis and a record of the same is maintained.

4.6 The PTL has ensured laboratory security and maintains a list of staff to permit access to various areas of the laboratory.

5. Reference: Record of Temperature and Humidity.

CHANGE HISTORY

 

Sr.No.

Date of change

Revision no. of old document

Date of old document

Revision no. of Revised document

Date of Revised document

Nature of change

(addition/deletion)

 

 

 

 

 

 

 

 


 END OF THE DOCUMENT

***********************************************************************************
You Also Like to See This:

2. PTL /QSP/02 Procedure for Document & Data Control

3. PTL /QSP/03 Procedure for Purchasing, Services, and Supplies

4. PTL /QSP/04 Procedure for Service to the Customer

5. PTL /QSP/05 Procedure for Customer Complaints

6. PTL QSP/06 Procedure for Control of Non-Conforming Testing.

7. PTL /QSP/07 Procedure for Improvement

8. PTL /QSP/08 Procedure for Corrective Action

9. PTL /QSP/09 Procedure for Preventive Action

10. PTL /QSP/10 Procedure for Control of Records

11. PTL /QSP/11 Procedure for Internal Audit

12. PTL /QSP/12 Procedure for Management Review

13. PTL /QSP/13 Procedure for Training

14. PTL /QSP/14 Procedure for Housekeeping

15. PTL /QSP/15 Procedure for Estimation of Uncertainty of measurement

16. PTL /QSP/16 Procedure for Equipment

17. PTL /QSP/17 Procedure for Measurement Traceability and Calibration

18. PTL /QSP/18 Procedure for Sampling

19. PTL /QSP/19 Procedure for Handling of Test and Calibration Items

20. PTL /QSP/20 Procedure for Assuring the Quality of Test

21. PTL /QSP/21 Procedure for Reporting of Results

22. PTL/QSP/22 Procedure for use of NABL Symbol
-----------------------------------------------------------------------------------------------------------


Note: Replace DTL with PTL for Drug Testing Laboratory.

SHARE

Owner

Hi. I’m Writer of Researchsop.com. ’ ’ Please share these SOPs to all concern pharma people for their development. I like to fullfill the need of curious people. These things inspire me to make things looks better.

  • Image
  • Image
  • Image
  • Image
  • Image
    Blogger Comment
    Facebook Comment

0 comments:

Post a Comment